Automatic Gate Repair in Parker, Texas - A1 Gate Guys

Automatic Gate Repair in Parker Texas

A1 Gate Guys is pleased to announce that they do automatic gate repair in Parker, Texas. A1 Gate Guys is the go to company for certified and reliable automatic gate operator repair, service or installation. Here at A1 Gate Guys we are always here 24/7 to repair, service, or replace your electric gate opener. Our electric gate technicians are hourly company employees as we do not hire or employ contractors. Our electric gate technicians have been certified and have training in repairing electric gates in Parker TX. We are the best, because we employ the best, with the highest level of gate operator knowledge.

Experience the difference by having one of our certified gate operator repair technicians provide you with a professional repair, service, or new operator installation in Parker TX. You can rest at night in Parker Texas knowing that your automatic gate will be in tip top shape.

It is always in your best interest as the homeowner to repair or have repaired any minor issues with yout automatic gate before creating a much bigger problem. Your automatic swing and sliding gate operator in Parker TX. could be malfunction for several different reasons. Here are a few common things that you can check for prior to having to calling a gate repair technician.

Here are Some actions you can try to do on your own, for you do it yourselfer type people:                                   

  1. Motor(s) need resetting when: (SL3000UL)
  2. Reset Motor LED light flashes once, THEN System ON LED will flash rapidly.
  1. Verify that your automatic swing or sliding gate opener, solar swing or sliding gate opener, battery backup swing or sliding gate opener, or electric swing or sliding gate opener has electrical power going to it.
  2. You should check the breaker that the automatic swing gate operator or electric slide gate operator is connected to by switching the breaker off and switching the breaker back on again.
  3. Inspect the surrounding area to ensure there is nothing physically interfering with the movement of your automatic, electric, battery backup, or solar slide gate operator, such as an object or obstruction on the “V” track or an object interfering the in gear or belt mechanisms compartment. If you find an object that is causing the interference, sometimes it can be as easy as powering off the automatic slide gate operator or electric swing gate operator and removing the object or obstruction.
  4. Audio Alarm ON: (SL3000UL)

Probable Cause:

5a. Gate has encountered two consecutive obstructions while trying to close or open.

Solution:

5A. Any re-new command will resume normal operation but not a radio command. Check for obstructions.

5B. You can stop the alarm by using the built-in reset button

5C. You can stop the alarm by using an optional stop button

  1. Note: If it is a solar powered swing or slide gate opener you will need to check the batteries to ensure that they are fully charged and connected correctly at the terminals. 6a. Inspect the batteries to ensure they are free of any type of corrosion.

6b. If corrosion is built up on the batteries or on or around the terminals and cable connections.

6c. You should disconnect the battery from the connection terminals and clean the     corrosion off both the batteries and connection terminals.

6d. Then reconnect the terminals onto the batteries and see if that works.

  1. What the LED’s on a LA400 board indicate:
  2. Alarm – This LED will illuminate when the gates gets a double obstruction. Will flash 3 times if batteries are low.
  3. Maglock – This LED will illuminate while opening and closing and be off when the gate is on a limit. This will only happen as long as Dip #2 (Mag) is On.
  4. Gate 1 – These are the open/close relays. These LED’s will illuminate when the board is providing 24VDC to the motor terminals.
  5. Gate 2 – These are the open/close relays. These LED’s will illuminate when the board is providing 24VDC to the motor terminals.
  6. Accessory Ovld – This LED will illuminate when there is more than 250 mA being drawn or a short across the accessory power output.
  7. Ovld – This LED will illuminate when there is more than 250 mA being drawn or a short across the switched accessory power output.
  8. Power – This LED will always be illuminated when there is AC or DC provided to the board.
  9. Chgr Ovld – This LED will illuminate when there is a short across the AC input.
  10. Fuse Open – This LED will illuminate when the fuse is bad. The fuse will blow out if there is a short on the batteries or if the batteries are bad. 
  1. You can do this by simply pressing your gate opener remote control button to ensure that you hear that the automatic swing or slide gate operator, solar swing or slide gate operator, battery backup swing or slide gate operator, or electric awing or slide gate operator is making a clicking sound.
  2. If you have a LiftMaster LA412UL or any other type of solar powered gate openers, check to see if the solar panel is receiving full sunlight and free of any debris.
  3. Just 1 10th of the solar panel being blocked from direct sunlight can cause the batteries not to fully charge, thus causing the solar powered swing or slide gate operator not to function properly.

LA412PKGU Swing Gate Operator Parts

1. Part # 41ASWG-442SA      Release Lever

2. Part # 41ASWG-0594SA    Motor with limit switch harness

3. Part # 41ASWG-0014SA    Rear connector

4. Part # 41AASWG-0597SA Cable 12 V with connector

5. Part # 41ASWG-0119         Release key

If you still cannot figure out what the issue or problem is with your gate operator, please do not hesitate to give us a call anytime day or night, 24 hours a day, 7 days a week, and 365 days a year at (469) 277-8333 A1 Gate Guys of Parker, Texas and schedule an on-time appointment to repair or service your automatic swing or sliding gate operator, solar powered swing or sliding gate operator, battery backup swing or sliding gate operator, or electric swing or sliding gate operator as soon as possible. We look forward to hearing from you, and you can always speak to one of our friendly and professional customer service representatives at (469) 277-8333.

Here are a few signs that your electric, automatic, battery backup, or solar power swing or slide gate needs to be serviced or repaired:

  • You hear a grinding or squeaking noise when the automatic swing or slide gate operator, solar powered swing or slide gate operator, battery backup swing or slide gate operator, or electric swing or slide gate operator is opening and or closing.
  • Your automatic slide or swing gate operator, solar powered slide or swing gate operator, battery backup slide or swing gate operator, and or electric slide or swing gate operator is moving much slower or even faster than usual.
  • Your solar powered swing gate opener is not charging correctly and is malfunctioning when it is in use.
  • A loose chain on your automatic, solar, battery backup, or electric slide gate operator that is hitting the concrete on your driveway.
  • Your gate remote control is lost or stolen.

Whether your slide gate opener chain that has come loose or your gate opener has stopped working, we have the solution for any of your Parker, Texas. A1 Gate Guys of Parker, Texas prides itself on the working and repairing the following but not limited to residential automatic, electric, and solar powered swing and slide gate. We repair most gate operators including  LiftMaster, US Automatic, Eagle, Viking as well as several other types of residential electric, gate operators. Our certified gate operator technicians can diagnose and repair the problem or even install a brand new automatic gate repair in Parker Tx

About Parker, TX

Parker is a city in Collin County, Texas, United States of America. The population was 3,811 at the 2010 United States Census Bureau.

The 1st settlers arrived in the area that is now known Parker, Texas in the early 1840s. The town was named after William C. Parker, the son of the area’s first known settler, John C. Parker. It was incorporated as a city on March 22, 1969.

Corinth Presbyterian Church was founded in Parker in 1846, with the current sanctuary built in 1923, and is thought to be the oldest continuing congregation in Collin County.

If you have any driveway gate repair needs in the Parker, TX. area please do not hesitate to give A1 Gate Guys a call at (469) 277-8333. We look forward to hearing from you if you ever need our professional automatic gate repair in Parker Texas.

Call Now Button