Best St. Paul Electric Gate Repair - A1 Gate Guys #

Electric gate repair in st. paul tx

St. Paul, Texas is where A1 Gate Guys is the one and only company to contact for all your automatic, electric, solar, gate repair / installation needs. A1 Gate Guys is the most reliable go to company for professionals to service, sale, repair, and replace most makes and models of residential slide and swing gate openers. Our staff here at A1 Gate Guys are always available for any of your emergencies and of course during normal business hours. A1 Gate Guys is aware that gate operators do not always malfunction during regular business hours, so no matter what the time of day or night you can call us. We hire hourly company employees and work exclusively for A1 Gate Guys. We do not hire or employ contractors or sub-contractors. All our electric gate technicians have had attended several swing and slide gate operator schools. You can always be assured during the day or night in St. Paul Tx knowing that your swing or sliding gate opener will be in tip top shape.

Here are a few simple things you can try to do on your own, if your a do it yourselfer type person.                                  

  1. Inspect the surrounding area to ensure there is nothing physically interfering with the movement of your automatic, electric, battery backup, or solar slide gate operator, such as an object or obstruction on the “V” track or an object interfering the in gear or belt mechanisms compartment. If you find an object that is causing the interference, sometimes it can be as easy as powering off the automatic, electric, battery backup, or solar slide gate operator or swing gate operator and removing the object or obstruction.
  2. Verify that your automatic swing or sliding gate opener, solar swing or sliding gate opener, battery backup swing or sliding gate opener, or electric swing or sliding gate opener has electrical power going to it.
  3. You should check the breaker that the automatic swing gate operator or electric slide gate operator is connected to by switching the breaker off and switching the breaker back on again.
  4. Note: If it is a solar powered swing or slide gate opener you will need to check the batteries to ensure that they are fully charged and connected correctly at the terminals. 4a. Inspect the batteries to ensure they are free of any type of corrosion.

4b. If corrosion is built up on the batteries or on or around the terminals and cable connections.

4c. You should disconnect the battery from the connection terminals and clean the     corrosion off both the batteries and connection terminals.

4d. Then reconnect the terminals onto the batteries and see if that works.

  1. Just 1 10th of the solar panel being blocked from direct sunlight can cause the batteries not to fully charge, thus causing the solar powered swing or slide gate operator not to function properly.
  2. What the LED’s on a LA400 board indicate:
  3. Alarm – This LED will illuminate when the gates gets a double obstruction. Will flash 3 times if batteries are low.
  4. Maglock – This LED will illuminate while opening and closing and be off when the gate is on a limit. This will only happen as long as Dip #2 (Mag) is On.
  5. Gate 1 – These are the open/close relays. These LED’s will illuminate when the board is providing 24VDC to the motor terminals.
  6. Gate 2 – These are the open/close relays. These LED’s will illuminate when the board is providing 24VDC to the motor terminals.
  7. Accessory Ovld – This LED will illuminate when there is more than 250 mA being drawn or a short across the accessory power output.
  8. Ovld – This LED will illuminate when there is more than 250 mA being drawn or a short across the switched accessory power output.
  9. Power – This LED will always be illuminated when there is AC or DC provided to the board.
  10. Chgr Ovld – This LED will illuminate when there is a short across the AC input.
  11. Fuse Open – This LED will illuminate when the fuse is bad. The fuse will blow out if there is a short on the batteries or if the batteries are bad. 
  12. Motor(s) need resetting when: (SL3000UL)
  13. Reset Motor LED light flashes once, THEN System ON LED will flash rapidly.
  14. Audio Alarm ON: (SL3000UL)

Probable Cause:

8a. Gate has encountered two consecutive obstructions while trying to close or open.

Solution:

8A. Any re-new command will resume normal operation but not a radio command. Check for obstructions.

8B. You can stop the alarm by using the built-in reset button

8C. You can stop the alarm by using an optional stop button

  1. You can do this by simply pressing your gate opener remote control button to ensure that you hear that the automatic swing or slide gate operator, solar swing or slide gate operator, battery backup swing or slide gate operator, or electric swing or slide gate operator is making a clicking sound.

LA412PKGU Swing Gate Operator Parts

1. Part # 41ASWG-0119         Release key

2. Part # 41ASWG-0594SA    Motor with limit switch harness

3. Part # 41ASWG-0014SA    Rear connector

4. Part # 41AASWG-0597SA Cable 12 V with connector

5. Part # 41ASWG-442SA      Release Lever

6. Part # SOLPNL10W12V     Solar Panel

7. Part # K74-34392                Antenna

8. Part # K1A6636                  Receiver Module – 315 MHz

9. Part # K23-19380                Reset Switch

Accessories:

  1. Part # 893MAX           3-Button Remote Control
  2. Part # 890MAX           3-Button Keychain Remote Control
  3. Part # 877MAX           Wireless Keypad
  4. Part # 828LM              Internet Gateway
  5. Part # 850LM              Receiver Kit
  6. Part # 375UT              Universal 2-Button Remote Control
  7. Part # 374UT              Universal 2-Button Keychain Remote Control
  8. Part # 387LM              Universal Wireless Keypad
  9. Part # 888LM              MyQ Control Panel
  10. Part # 885LM              Wireless Control Panel
  11. Part # 880LMW           Smart Control Panel

If you are still having issues and cannot figure out what the problem is with your swing or slide  gate operator, please do not hesitate to give us a call anytime day or night, 24 hours a day, 7 days a week at (469) 277-8333. A1 Gate Guys of St. Paul, Texas and schedule an on-time appointment to repair or service your automatic swing or slide gate operator.

Whether it is your electric, or solar sliding gate opener chain that has come loose or your solar powered swing and sliding gate opener has stopped working we have the solution for you. A1 Gate Guys of St. Paul, Texas is an Authorized LiftMaster Dealer and prides itself on the servicing and repairing of the following but not limited to residential driveway gate operator manufactures: LiftMaster, US Automatic, Eagle, Viking as well as several other types of residential gate operators. Our professional certified gate operator technicians can diagnose and repair the problem and or even install a brand new automatic, electric, battery backup, or solar gate operator for you and everyone else in your household.

About St. Paul, TX

St. Paul is a town located in Collin County, Texas, in the United States of America. The population was 1,066 at the 2010 United States Census Bureau, up from 630 at the 2000 United States Census Bureau.

Please give us a call if you ever electric gate repair needs near you in the St. Paul, TX. area. Please do not hesitate to give A1 Gate Guys a call at (469) 277-8333 and speak to one of our professional customer service representatives to schedule an on-time appointment at your convenience. We look forward to hearing from you if you ever need our professional gate repair services or new operator installation services. A1 Gate Guys is your trusted full-service electric gate repair, service / installation in the St. Paul, Texas, and surrounding areas.

Call Now Button